|
|
Studying the behavior of concrete at high temperatures
Tillová, Jana ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
This master‘s thesis is focused on the study of the behavior of cement concrete at high temperatures with a focus on monitoring the impact of aggregate and cement type. This work describes the processes in aggregates and cement matrix at high temperatures. The theoretical part describes the selestion of a suitable aggregate and cement for the surroundings with potential exposure to high temperatures. In the experimental part is given design of composition of a concrete with two types of aggregates and four cements. It has been suggested 8 recipes. Changes were observed densities, compressive strength and tensile strength in bending, calculate the velocity of propagation of waves with ultrasonic pulsed method. Also evaluated the appearance of the surface samples after thermal load – cracks on the surface and measure the maximum crack width.
|
|
|
Study of thermal insulation properties of cement concrete exposed to high temperature
Nováková, Iveta ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
Master`s thesis is divided in to two parts, practical and theoretical. In theoretical part are listed basic information’s about light weight concrete, special emphasis are given to characteristic and practical application of compact light weight concrete with Liapor aggregates. In this study is described influence of high temperature on concrete structure and chemical, mechanical and physical changes, which take place during exposal to high temperatures. Further is evaluated surface permeability of concrete and addition of polypropylene fibres to concretes resistive to high temperatures. The practical part deals with design, production and testing of cement based concrete with use of different aggregates (light weight aggregates Liapor, basalt). The properties and use for applications in high temperatures is also mentioned. The influence of high temperature on strength, absorption, thermal conductivity, changes of surface permeability and degradation of testing specimens due to heat loads according to normative heat curve (ISO 834). For better transparency are experimental tests divided in to five phases and the measured values are evaluated on the end of each phase. In conclusion are resumed all knowledge’s obtained by testing and evaluated the most suitable formulation. The approach for further research is also mentioned.
|
|
|
The concrete with a higher resistance to high temperatures
Mikulinec, David ; Hela,, Rudolf (referee) ; Bodnárová, Lenka (advisor)
The result of this master’s thesis is acquaintance with the issues of cement concrete resistance to high temperatures. This work describes the processes ongoing in the structure of concrete at extreme thermal loads and analysis of effects of high temperatures on the individual components of reinforced concrete structures is given, then influence of high temperatures and fire on the aggregates, matrix, reinforcement steel and the resulting changes in their properties. In the experimental part is given design of composition of concrete with a higher resistance to high temperatures and subsequent verification of the physico-mechanical properties of sample of concrete after exposure to temperatures at intervals of 200 ° C, 400 ° C, 600 ° C and 900 ° C. In individual recipes were observed changes of volume weight, changes of compressive strength and tensile strength flexural , tensile strength of surface layers and the occurrence of cracks and then were compared the results of thermally loaded and unloaded samples. The benefit in this issue is to evaluate the surface appearance of samples after heat load - study of area of crack and measurement of their width - was used according to the methodology's authors Xing, Hebert, Noumowe a Ledesert given in Cement and Concrete Research. This methodology allows to quantify changes of surface, after temperature load.
|
|
|
Properties of concrete with cement matrix at high temperatures
Fiala, Jiří ; Dvořák, Karel (referee) ; Bodnárová, Lenka (advisor)
This bachelor´s thesis deals with the behaviour of the cement concrete at high temperatures depending on the aggregate and cement type. The theoretical part describes the processes in the concrete structure at high temperatures affecting the individual concrete components. The design of concrete structure with basalt aggregate and four types of cement in the experimental part was carried out. The proof of physical-mechanical properties after thermal load was reviewed, particularly change of density, compressive strength and tensile strength in bending. The X-ray diffraction analysis was carried out with prepared test samples.
|
|
|
Diagnostic properties of concrete exposed to high temperatures
Hudský, Petr ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
This master’s thesis studies the problems of high temperatures on cement concretes, their following diagnostics from pre-treatment to rehabilitation, the emphasis was on the use of high-speed water jet. In the experimental part of the design of a concrete composition with basalt aggregate. Were reviewed the physico-mechanical properties after thermal loading. The influence of pressure water jet on the thermal load on concrete, pull-off test, the volume of the removed concrete with a strength evaluation and comparison.
|
|
|
Studying the behavior of concrete at high temperatures
Fiala, Jiří ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
This thesis deals with the behavior of cement concrete at high temperature with a focus on the impact behavior of aggregate, cement type and polypropylene fiber reinforcement. The theoretical part describes the issue of cement concrete at high temperatures, especially processes in the cement matrix, aggregates and polypropylene fibers. Furthermore, theoretical part describes the selection of a suitable type of cement and aggregates in concrete exposed to high temperatures. In the experimental part was designed the concrete composition with various kinds different types of aggregates and two types of cements. The temperature stress of test samples was performed according to ISO standard temperature curve 834. Subsequently, was made the verification of the physic-mechanical properties such as changes in bulk density and compressive strength after heat load. Moreover, the surface appearance of samples after heat load was evaluated, especially the occurrence of samples, the crack width and explosive spalling. Mineralogical composition changes of prepared samples before and after heat load were observed via X-ray diffraction analysis. Finally, we made a photogrammetry on a test plates after heat load which defined the size of the area and depth of spalling concrete surface.
|
|
|
Study of thermal insulation properties of cement concrete exposed to high temperature
Nováková, Iveta ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
Master`s thesis is divided in to two parts, practical and theoretical. In theoretical part are listed basic information’s about light weight concrete, special emphasis are given to characteristic and practical application of compact light weight concrete with Liapor aggregates. In this study is described influence of high temperature on concrete structure and chemical, mechanical and physical changes, which take place during exposal to high temperatures. Further is evaluated surface permeability of concrete and addition of polypropylene fibres to concretes resistive to high temperatures. The practical part deals with design, production and testing of cement based concrete with use of different aggregates (light weight aggregates Liapor, basalt). The properties and use for applications in high temperatures is also mentioned. The influence of high temperature on strength, absorption, thermal conductivity, changes of surface permeability and degradation of testing specimens due to heat loads according to normative heat curve (ISO 834). For better transparency are experimental tests divided in to five phases and the measured values are evaluated on the end of each phase. In conclusion are resumed all knowledge’s obtained by testing and evaluated the most suitable formulation. The approach for further research is also mentioned.
|
|
|
Diagnostic properties of concrete exposed to high temperatures
Hudský, Petr ; Sitek,, Libor (referee) ; Bodnárová, Lenka (advisor)
This master’s thesis studies the problems of high temperatures on cement concretes, their following diagnostics from pre-treatment to rehabilitation, the emphasis was on the use of high-speed water jet. In the experimental part of the design of a concrete composition with basalt aggregate. Were reviewed the physico-mechanical properties after thermal loading. The influence of pressure water jet on the thermal load on concrete, pull-off test, the volume of the removed concrete with a strength evaluation and comparison.
|
|
|
Studying the behavior of concrete at high temperatures
Tillová, Jana ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
This master‘s thesis is focused on the study of the behavior of cement concrete at high temperatures with a focus on monitoring the impact of aggregate and cement type. This work describes the processes in aggregates and cement matrix at high temperatures. The theoretical part describes the selestion of a suitable aggregate and cement for the surroundings with potential exposure to high temperatures. In the experimental part is given design of composition of a concrete with two types of aggregates and four cements. It has been suggested 8 recipes. Changes were observed densities, compressive strength and tensile strength in bending, calculate the velocity of propagation of waves with ultrasonic pulsed method. Also evaluated the appearance of the surface samples after thermal load – cracks on the surface and measure the maximum crack width.
|
|
|
The concrete with a higher resistance to high temperatures
Mikulinec, David ; Hela,, Rudolf (referee) ; Bodnárová, Lenka (advisor)
The result of this master’s thesis is acquaintance with the issues of cement concrete resistance to high temperatures. This work describes the processes ongoing in the structure of concrete at extreme thermal loads and analysis of effects of high temperatures on the individual components of reinforced concrete structures is given, then influence of high temperatures and fire on the aggregates, matrix, reinforcement steel and the resulting changes in their properties. In the experimental part is given design of composition of concrete with a higher resistance to high temperatures and subsequent verification of the physico-mechanical properties of sample of concrete after exposure to temperatures at intervals of 200 ° C, 400 ° C, 600 ° C and 900 ° C. In individual recipes were observed changes of volume weight, changes of compressive strength and tensile strength flexural , tensile strength of surface layers and the occurrence of cracks and then were compared the results of thermally loaded and unloaded samples. The benefit in this issue is to evaluate the surface appearance of samples after heat load - study of area of crack and measurement of their width - was used according to the methodology's authors Xing, Hebert, Noumowe a Ledesert given in Cement and Concrete Research. This methodology allows to quantify changes of surface, after temperature load.
|
guest ::
